Digital Panel Meter Selection Guide

Exceptional flexibility to solve industrial measurement & control problems

DC Digital Panel Meter:    Voltmeter for DC Voltage, Ammeter for DC Current

DC Digital Panel Meter

Exceptional accuracy and high read rate with five digital voltmeter ranges from 200.00 mV to ±300.0 V and four digital ammeter ranges from ±2.0000 mA to ±5.000 A, all factory pre-calibrated. Shipped ready to run.
True AC RMS Panel Meter

True AC RMS Panel Meter

Five AC RMS voltmeter ranges to 200.00 mV to 600.0 V and four AC RMS ammeter ranges from 2.0000 mA to 5.000 A, all factory pre-calibrated. Shipped ready to run.
Process Meter and Strain Gauge Meter Digital Panel Meters

Process Meter & Analog Ratio Meter

Sealed on all sides to IP-65 / NEMA-4. Includes 1/8 DIN panel cutout and three wire glands. Available as BOX2 with IPC splash-proof cover.
Process Panel Meter & Totalizer for 0-10V or 4-20 mA signals

Process Meter & Totalizer

User-scalable for display to ±999,999 for 0-1 mA, 4-20 mA, or 0-10 V process signals requiring zero and span adjustment. Includes a voltage-to-frequency converter to totalize analog signals, for example to display volume from a 0-10V flow transducer. Includes a 5, 10, 24V transducer excitation output (user-selectable).
DC  Digital Panel Meter: Voltmeter for DC Voltage, Ammeter for DC Current

Load Cell, Strain Gauge & Microvolt Meter

A high-sensitivity 5-digit meter for use with load cells, strain gauges and microvolt input signals where high accuracy and stability are required. Most sensitive full scale of ± 20 mV. Load cell operation allows 4- or 6-wire hookup and display in engineering units, such as lbs, kg or psi. Built-in excitation for up to four 350-ohm load cells in parallel.
Weighing scale and  scale meter for weighing weight scale readout

Scale / Weight Meter

Equipped with a DC or load cell signal conditione board, this offers special firmware for scale / weighing applications: two tare functions; count by 1, 2, 5, 10, 20, 50 or 100; auto-zero function; setpoint offset, and dummy right-hand zero for display to 999,990. Built-in excitation for up to four 350-ohm load cells in parallel.
Thermocouple Temperature Meter

Thermocouple Temperature Meter

High accuracy in one instrument for seven thermocouple types (J, K, T, E, N, S, R), each in one range. User-selectable thermocouple type, °C or °F, and 1° or 0.1° resolution. Pre-calibrated for all sensor types. Wide range of options for communication and temperature control. Shipped ready to run.
RTD Temperature Meter

RTD Temperature Meter

Exceptional accuracy RTD temperature meter for Pt100 100-ohm platinum RTDs (DIN or ANSI alpha), Ni120 nickel and Cu10 copper. User selectable RTD type, unit of measure (°F or °C) resolution (1° , 0.1° or 0.01°), and 2, 3 or 4-wire hookup to eliminate lead resistance effects. Pre-calibrated for all RTD types. Wide range of options for communication and temperature control. Shipped ready to run.
Ohmmeter for resistance measurement

Ohmmeter

Factory calibrated for five jumper selectable resistance ranges from 20Ω to 200 KΩ. Exceptional accuracy of ±0.01% of full scale. In the 20Ω range, resolution is 1 milliohm, making the meter suitable for contact resistance measurements. Custom curve linearizatio for transducers whose output is a changing resistance. 3 or 4 wire connection eliminates lead resistance effects.
L40 Low-Cost Universal Analog Input Digital Panel Meter

L40 Low-Cost Universal Analog Input Digital Panel Meter

Universal meter for 65 user-selectable analog input signal types and ranges: DC voltage and current, AC RMS voltage and current, process signals (4-20 mA, 0-10V), thermocouple (10 types, °C or °F), RTD (6 types, °C or °F), thermistors (NTC or PTC), resistance (0-10k or 0-100k ohms), and potentiometer inputs. 18-265 Vac/dc power. 1/8 DIN case.
Current Loop Powered Digital Panel Meter

88-PRO Loop-Powered Digital Panel Meter

Scalable process meter powered by 4-20 mA, 10-50 mA or 1-5 mA current loop, with no need for external power. 12.7 mm (0.50") high LCD digits, 1/8 DIN case.
M-35 Microminiature  Digital Process Panel Meter

M-35 Microminiature Digital Process Meter

Fits 22.5 x 45 mm cutout. Accepts 4-20 mA, 0-10 mA, 0-2 V, 1-5 V, or 0-10 V signals. Powered by isolated 10-30 Vdc.
Magna Series Large Digit Digital Panel Meters and Remote Displays

Magna Series 2", 4", 6" or 8" Large-Digit Displays

Available with four or six 57 mm (2.2"), 102 mm (4"), 150 mm (6"), or 200 mm (8") high digits for process signal, strain gauge, load cell, temperature, and pulse inputs. Optional dual 5A relays, analog output, and serial output. Choice of display brightness and cases for indoor or outdoor mounting.